BYD ATTO 3 (e-Platform 3.0) Right Front High Beam Not Working

A right front high beam failure indicates that the right high-beam headlamp is not operating when commanded. The fault affects the exterior lighting system, including the headlamp assembly, high-beam control circuit, body control functions, wiring, and associated electronic controls that manage high-beam operation. The BYD ATTO 3 uses BYD’s e-Platform 3.0 architecture, with this generation introduced from 2022 and continuing onward.

Symptoms

• Right front high beam does not illuminate
• Left high beam may continue operating normally
• High-beam indicator may not operate as expected
• Right headlamp may operate intermittently
• Low beam or daytime running light may still function
• Headlamp-related fault may be stored
• Reduced visibility during night driving

Possible Causes

• Failed right high-beam LED or headlamp assembly
• Fault in the right high-beam power supply
• Open circuit in the high-beam wiring
• Short circuit in the lighting circuit
• Loose or damaged headlamp connector
• Poor or corroded connector terminals
• Damaged wiring near the headlamp
• Lighting control-module fault
• Body control module fault
• Low or unstable 12V auxiliary voltage
• Internal headlamp electronic failure
• Communication fault affecting high-beam control

Diagnosis

Diagnosis should begin by confirming the right high-beam failure and checking whether the other functions within the same headlamp operate normally. The high-beam power and ground circuits, connector condition, wiring continuity, control-module output, and relevant lighting-system data should then be evaluated against manufacturer specifications.

Comparing the right and left high-beam circuits can help determine whether the fault is isolated to the headlamp assembly or originates in the vehicle-side wiring or control system. For New Zealand owners, confirming the electrical fault before replacing a complete LED headlamp assembly can help avoid unnecessary repair costs.

Accurately diagnosing this fault often requires manufacturer testing procedures, wiring diagrams, connector pinouts, specifications, and system calibration information. Access to the factory service manual significantly reduces diagnostic time and helps prevent unnecessary parts replacement.

Applicable Years

2022, 2023, 2024, 2025, 2026, onwards

To order the correct OEM Service and Repair Manual for your BYD ATTO 3, submit your request using the form below and our team will provide the ordering details.