Your Cart is empty
2010 Subaru Outback Service and Repair Manual
Price: $37.99
Overview
This factory Service and Repair Manual for the 2010 Subaru Outback provides comprehensive service information, factory repair procedures, diagnostic workflows, and maintenance specifications for all major vehicle systems.
Covering the all-new fourth-generation Subaru Outback (BR/BM), this manual includes complete Boxer engine repair procedures, automatic and CVT transmission servicing, Symmetrical All-Wheel Drive system diagnostics, electrical troubleshooting, factory wiring diagrams, braking system repairs, air conditioning servicing, and body repair procedures.
The 2010 Outback introduced a larger platform, increased ground clearance, improved ride comfort, and Subaru's new Lineartronic CVT transmission on four-cylinder models. Available with 2.5L Boxer four-cylinder and 3.6L Boxer six-cylinder engines, the 2010 Outback combined all-weather capability with wagon practicality. Advanced driver assistance technologies such as EyeSight, adaptive cruise control, lane departure warning, and pre-collision braking were not available on most 2010 models, making this manual fully aligned with the vehicle's actual systems and technology.
✓ Genuine factory workshop manual
✓ Complete Boxer engine, transmission, and AWD repair procedures
✓ Factory wiring diagrams and electrical diagnostics
✓ Covers four-cylinder, six-cylinder, petrol, and diesel models
✓ We review every manual to ensure it's genuine and safe for downloadThis 2010 Subaru Outback Service and Repair Manual Covers
Engine & Drivetrain
- 2.5L FB25 Boxer petrol engine
- 3.6L EZ36 Boxer six-cylinder engine
- 2.0L EE20 Boxer turbo diesel engine (selected markets)
- Engine mechanical overhaul procedures
- Multi-Point Fuel Injection diagnostics
- Common-rail diesel system diagnostics
- Engine cooling system repairs
- Exhaust and emissions control system diagnostics
- Lineartronic CVT transmission servicing (2.5i models)
- 6-speed manual transmission repairs (selected markets)
- 5-speed automatic transmission servicing (3.6R models)
- Symmetrical All-Wheel Drive diagnostics
- Active Torque Split AWD system repairs
- Differential and driveshaft servicing
Chassis & Suspension
- Front MacPherson strut suspension repairs
- Rear double wishbone suspension servicing
- Electric Power Steering (EPS) diagnostics
- Steering angle sensor calibration
- Wheel alignment specifications
- Wheel bearing inspection and replacement
- Suspension component testing and repairs
- Vehicle Dynamics Control (VDC) diagnostics
Braking Systems
- Anti-lock Braking System (ABS) diagnostics
- Electronic Brakeforce Distribution (EBD) diagnostics
- Vehicle Dynamics Control (VDC) servicing
- Brake Assist system diagnostics
- Hill Start Assist diagnostics
- Brake hydraulic system repairs
- Front and rear disc brake servicing
Electrical & Wiring
- Complete factory wiring diagrams
- Subaru Select Monitor diagnostic procedures
- CAN Bus communication diagnostics
- Body Integrated Unit (BIU) diagnostics
- Keyless Access and Push-Button Start diagnostics (where equipped)
- Instrument cluster troubleshooting
- Audio and navigation system diagnostics
- Battery, charging, and starting system testing
- Power window and central locking repairs
Air Conditioning & HVAC
- Manual and dual-zone automatic climate control diagnostics
- HVAC control module servicing
- Refrigerant recovery and charging procedures
- Heater and ventilation system repairs
- Air mix door actuator diagnostics
- Climate control troubleshooting
Body & Interior
- Interior trim removal and installation procedures
- Door, tailgate, and lock system repairs
- Window regulator servicing
- Exterior body panel replacement procedures
- Seat and seatbelt repairs
- Supplemental Restraint System (SRS) diagnostics
- Occupant detection system diagnostics
Diagnostics & Troubleshooting
- Subaru Select Monitor diagnostic procedures
- OBD-II diagnostic workflows
- Diagnostic Trouble Code (DTC) troubleshooting
- CVT transmission diagnostics
- AWD system diagnostics
- Diesel system diagnostics (where equipped)
- Sensor and actuator testing procedures
- ECU and control module diagnostics
- CAN network troubleshooting
Common Error Codes Covered
This manual provides diagnostic and repair procedures for common fault codes associated with the 2010 Subaru Outback.
Engine Codes
- P0011 — Intake Camshaft Timing Over-Advanced
- P0171 — System Too Lean (Bank 1)
- P0300 — Random/Multiple Cylinder Misfire Detected
- P0420 — Catalyst System Efficiency Below Threshold
- P0401 — EGR Flow Insufficient (Diesel Models)
- P2458 — Diesel Particulate Filter Regeneration Duration Too Long
Transmission Codes
- P0700 — Transmission Control System Malfunction
- P0841 — Transmission Fluid Pressure Sensor Range/Performance
- P0965 — Pressure Control Solenoid Fault
- P2764 — Torque Converter Clutch Pressure Control Solenoid Fault
ABS & Chassis Codes
- C0071 — Steering Angle Sensor Fault
- C0045 — Wheel Speed Sensor Fault
- C0111 — ABS Hydraulic Unit Fault
Airbag & Safety Codes
- B1650 — Occupant Detection System Fault
- B1811 — Driver Airbag Circuit Fault
- B1821 — Passenger Airbag Circuit Fault
Network & Electrical Codes
- U0073 — Control Module Communication Bus Fault
- U0100 — Lost Communication With ECM/PCM
- U0155 — Lost Communication With Instrument Cluster
And hundreds of additional fault codes, wiring diagrams, diagnostic procedures, AWD system tests, inspection specifications, and factory repair instructions specific to the 2010 Subaru Outback.
Who Is This Manual For?
- Professional automotive workshops
- Subaru specialists
- Independent repair garages
- Mobile mechanics
- Automotive technicians
- Outback owners performing DIY maintenance and repairs
- Automotive training institutions
If you are troubleshooting, maintaining, servicing, or repairing a 2010 Subaru Outback, this is the factory workshop manual you need.
No reviews yet. Be the first to review this product.
Returns accepted within 30 days of delivery. See our returns policy for full details.
